ALUMINUM ROAD STUDAvailable sizes: L 100 x W 100 x H 25 mmBasically, road spikes have yellow, red or white light reflectors. Even though the surface condition of the asphalt is dry or wet, the light of the road nails can reflect light.Of course if at night this road nail will be very useful, especially if the street is not equipped with qualified lighting. Not only box-shaped, road spikes can also be round like glass. Of course the function is the same that can reflect light.Even though it is applied on asphalt, this road nail is strong enough and can even be stacked with tons of weight.The durability of these nails is due to the use of aluminum alloy material, while the reflector is made of special beads that can reflect light, break and not fade easily.This reflector is not uncommon in the form of LED lights that are powered by batteries and solar power. It also makes road spikes more energy efficient because they don't need electricityMeanwhile, the color of road nails cannot be arbitrary, because each color has a different function.Road Stud Regulated by the Government
In Indonesia, as reported by Otosia, road spikes are regulated in Ministerial Decree Number KM 60 of 1993 concerning Road Markings. Based on these regulations, road spikes can be a substitute for road markings in the form of lines on the road surface.Spikes have three different colors and functions. For the lane separator or traffic lane a yellow reflector is used. The red reflector is placed on the edge of the road. While the white color is used at the border of the right side of the road.In order not to disturb road users, road studs, another term for road spikes, should not protrude more than 15 mm above the road surface. If equipped with a reflector, the height of this object may not exceed 40 mm.